DFI 586ITBD, User Manual

Page: 21 / 89

2
Hardware Installation
21
1. Pull the “tabs” which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the “notches” in the
module aligned with the “keys” on the socket.
3. Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
Pin 1
Notch
Key
Tab
Tab
Installing the DIM Module
A DIM module simply snaps into a socket on the system board. Pin
1 of the DIM module must correspond with Pin 1 of the socket.
Memory Size
32MB
40MB
40MB
48MB
48MB
64MB
128MB
256MB
DIM 0
16MB
8MB
32MB
16MB
32MB
32MB
64MB
128MB
DIM 1
16MB
32MB
8MB
32MB
16MB
32MB
64MB
128MB