DFI 586ITBD, User Manual, Page: 57 / 89

3
Award BIOS Setup Utility
57
Power Management Setup
The Power Management Setup allows you to configure your system
to most effectively save energy. If you like to use the soft power
down feature of Windows

95, you must enable the Power
Management below. Select Min. Power, Max. Power or User Defined.
Either one can be used as long as it is NOT disabled.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze mode, Standby mode, and
Suspend mode.
Disable No power management. Disables the Doze, Standby and
Suspend modes.
Min. Power Saving Minimum power management. Doze Mode = 1
hr., Standby Mode = 1 hr., and Suspend Mode =
1 hr.
Max. Power Saving Maximum power management. Doze Mode = 1
min., Standby Mode = 1 min., and Suspend
Mode = 1 min.
User Defined Allows you to set each mode individually. When
enabled, each option ranges from 1 min. to 1 hr.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
PM Control by APM
Video Off Method
Video Off After
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
VGA Active Monitor
Soft-Off by PWR-BTTN
Resume by Ring
Resume by Alarm
IRQ 8 Break Suspend
: Disabled
: Yes
: DPMS
: Standby
: 3
: Disabled
: Disabled
: Disabled
: Disabled
: 62.5%
: Enabled
: Hold 4 Sec.
: Enabled
: Disabled
: Disabled
** Reload Global Timer Events **
IRQ [3-7, 9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
ESC
F1
F5
F6
F7 : Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
↑ ↓ → ←