Develop ineo+ 25 User Manual Download Page 235

Page: 235 / 340

Replacing Consumables

8-25

Remove the all toner cartridges,
all imaging units and waste
toner bottle.

For details on removing
the toner cartridges,
imaging units or waste
toner bottle, refer to
“Replacing a Toner Car-
tridge” on page 8-5 or
“Replacing an Imaging
Unit” on page 8-10.

Cover the removed imag-
ing unit to protect it from direct sunlight.

Do not tilt removed toner cartridge, otherwise toner may spill.

Do not tilt removed waste toner box, otherwise waste toner may
spill.

Pull the lever, and then open the
right door.

Before opening the right
door, fold up Tray 1.

Remove the top part of the right
door.

Summary of Contents for ineo+ 25





















































































































































































































































































































































Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands

Develop ineo+ 25, User Manual

Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands