Develop ineo+ 25, User Manual

Page: 168 / 340

Making Basic Copies 6-4
3
Press the + or , key to select [MIX], [TEXT], [PHOTO], [FINE/MIX], [FINE/
TEXT] or [FINE/PHOTO], and then press the Select key.
The main screen (Copy mode) appears again.
d
The default setting is [FINE/MIX] . However, when a document is
loaded into the ADF, the setting [MIX] is automatically selected in
order to give priority to the speed.
The setting can be changed after a document is loaded into the
ADF. Follow steps 1 through 3, described above, to change the
setting.
After a document loaded into the ADF is finished being copied,
the default setting [FINE/MIX] is automatically selected.
However, the setting that was changed before the document was
loaded into the ADF is retained.
Specifying the Copy Density
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2
Press the + or , key to select [DENSITY], and then press the
Select
key.
3
Press the * or ) key to select the desired copy density, and then press
the
Select
key.
As the indicator is moved to right, the density becomes darker.
d
If [TEXT] or [FINE/TEXT] is selected as the copy mode, select
either [AUTO] or [MANUAL] in step 3. If [MANUAL] is selected,
specify the copy density.
Specifying the Copy Sharpness
1
In the main screen (Copy mode), press the + or , , key to select the cur-
rent copy quality setting, and then press the Select key.
2
Press the + or , , key to select [SHARPNESS], and then press the
Select
key.
3
Press the * or ) key to select the desired copy sharpness, and then
press the Select key.
As the indicator is moved to right, the density becomes clear.
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by
specifying a custom zoom ratio.