manualshive.com logo in svg

Develop ineo+ 25, User Manual

Share
Download
Develop ineo+ 25 User Manual Download Page 122

Media

3-8

Postcard

You can print continuously with postcard. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.

Try printing your data on a sheet of plain paper first to check placement.

Use postcards that are

-

Approved for laser printing

DO NOT use postcards that are

-

Coated

-

Designed for inkjet printers

-

Precut or perforated

-

Preprinted or multicolored

d

If the postcard is warped, press on the 
warped area before putting it in the tray.

-

Folded or wrinkled

Capacity

Tray 1/2 

Up to 20 sheets, depending on their thick-
ness

Tray 3

Not supported

Orientation Tray 1

Face down

Tray 2

Face up

Driver 
Media Type

[Postcard]

Duplexing

Not supported

Summary of Contents for ineo+ 25





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands