Develop ineo+ 25 User Manual Download Page 223

Page: 223 / 340

Replacing Consumables

8-13

While pressing down the area
marked “Push” on the imaging
unit to be replaced, slide the unit
completely out of the machine.

The following instructions show
the procedure to replace the
imaging unit (K).

Note

Dispose of the used imaging unit according to your local regulations.
Do not burn the imaging unit.

Check the color of the new imaging unit to be installed.

In order to prevent toner from spilling, leave the imaging unit in the
bag until step 7 is being performed.

Remove the imaging unit from
the bag.

Summary of Contents for ineo+ 25





















































































































































































































































































































































Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands

Develop ineo+ 25, User Manual

Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands