Develop ineo+ 25 User Manual Download Page 210

Page: 210 / 340

Scanning With the Machine

7-32

Deleting a Queued Transmission Job

The list of jobs queued for transmission can be displayed, and a job can be
deleted.

In the main screen (Scan mode), press the

key to select [CANCEL

RESERV.], and then press the

Select

key.

Press the

key to select the job to be deleted, and then press the

Select

key.

To check the information for the selected job, press the

)

key.

If no jobs are queued for transmission, [NONE] appears.

Press the

key to select [YES], and then press the

Select

key.

The main screen (Scan mode) appears again.

Summary of Contents for ineo+ 25





















































































































































































































































































































































Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands

Develop ineo+ 25, User Manual

Search results

Summary of Contents for ineo+ 25

Reviews:

Related manuals for ineo+ 25

Brands by name

Popular brands