Develop FK-506 Page 95 User Manual Download

Page: 95 / 316

Faxing

FK-506

3-27

Specifying multiple destinations (broadcast transmission)

A document can be sent to multiple destinations with a single operation. This
is called a broadcast transmission.

Note

Use memory transmission to send a fax to multiple destinations.

Use any of the following methods to specify multiple destinations.

Manual dialing

One-touch dialing

Speed dialing

Group dialing

Phone book dialing

Destinations can be specified using any combination of the methods listed
above.

Detail

A maximum of 255 destinations can be specified for the same
transmission.

When the one-touch dial keys are used, a maximum of 32 destinations
can be specified.

When the speed dial numbers are used, a maximum of 240 destinations
can be specified.

When fax numbers are directly typed in, a maximum of 16 destinations
can be specified.

Position the document to be faxed.

–

Refer to "Positioning the document" on page 3-6.

Press the [Function] key.

The "FAX FUNCTION" menu
appears.

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands