Develop FK-506 User Manual Download Page 303

Page: 303 / 316

Appendix

FK-506

8-19

Printing the list of one-touch dialing, speed dialing and group dialing
settings

On the "File" menu, click [Print] button.

The following dialog box appears.

Select the check box for the items to be printed, and then click the [OK]
button.

Saving settings to a computer

Click .

Specify the folder where the file is to be saved, and then type in the
name of the file.

Click the [Save] button.

–

The settings can also be saved by clicking "Save" on the "File"
menu.

Saving settings to this machine

Click

to send the settings to this machine.

–

The settings can also be saved to this machine by clicking "Upload"
on the "Machine" menu.

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Brands by name

Popular brands