Develop FK-506 Page 158 User Manual Download

Page: 158 / 316

Internet faxing

5-6

FK-506

Press the [

] or [

] key until "AUTO DETECTION" or "MANUAL" is

selected, and then press the [OK] key.

To begin scanning, press the [OK] key.

–

To change the size of paper to be scanned, press the [

] key, and

then specify the size.

To continue scanning document pages, position the next document
page, and then press the [OK] key.

–

Repeat this step until all document pages have been scanned.

BOOK SCAN

MANUAL:

AUTO DETECTION

SCAN BOOK(AUTO)
SCAN=OK (SIZE=

)

Memory:100%

QUALITY:STD/TEXT

NEXT PAGE?(AUTO)
SCAN=OK (TX=START)

Memory:100%

QUALITY:STD/TEXT

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands