Develop FK-506 Page 142 User Manual Download

Page: 142 / 316

Useful transmission and reception functions

4-20

FK-506

Specify the fax number of the recipient.

–

For details on specifying the recipients, refer to step 7 in
"Specifying multiple destinations (broadcast transmission)" on
page 3-27.

To enter the polling ID and password, press the [

] key.

–

If there is no need to enter a polling ID and password, press the [OK]
key, and then continue with step 7.

Use the keypad to type in the polling ID (no more than 20 digits), and
then press the [OK] key.

–

To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.

POLLING RX

POLL ID SETTING=

DESTINATION
:0123456

POLL ID

:0000_

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands