Develop FK-506 Page 74 User Manual Download

Page: 74 / 316

Faxing

3-6

FK-506

3.2

Positioning the document

Loading the document into the document feeder

Reminder

Document pages bound with staples or paper clips can damage the
machine. Be sure to remove all staples and paper clips before faxing a
document.

Press the [Fax] key.

The machine enters Fax mode, and
the Fax mode screen appears.

Load the document into the document feeder with the side to be
scanned facing up.

–

A maximum of 50 sheets of plain A3-size paper can be loaded.

–

Only a single page can be loaded if the document has a length of
432 mm (17 inches) or more.

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands