Develop FK-506 Page 231 User Manual Download

Page: 231 / 316

Utility mode/Fax mode parameters

FK-506

6-49

–

When the switching plate is open in the upper position, the keys are
numbered 17 through 32.

Press the [

] or [

] key until "EDIT" or "DELETE" is selected, and then

press the [OK] key.

–

If "EDIT" was selected, continue with the next step.

–

If "DELETE" was selected, the registered program settings are
deleted and the "DIAL REGISTRATION" menu appears again.

Press the [

] or [

] key until "ADD" or "CHECK/EDIT" is selected, and

then press the [OK] key.

–

If "ADD" was selected, specify the recipient.

–

If "CHECK/EDIT" was selected, continue with the next step.

If necessary, change the recipient settings.

–

Repeat steps 5 and 6 until all changes have been specified.

–

To return to the screen where "ADD" or "CHECK/EDIT" can be
selected, press the [Back] key.

Select "RETURN", and then press the [OK] key.

The settings are registered, and the "DIAL REGISTRATION" menu
appears again.

PROGRAM DIAL 32

DELETE

EDIT

RETURN

POLLING RX

CHECK/EDIT

ADD

RETURN

Summary of Contents for FK-506





























































































































































































































































































































Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands

Develop FK-506, User Manual

Search results

Summary of Contents for FK-506

Reviews:

Related manuals for FK-506

Brands by name

Popular brands