65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 27 -
Marker control state
Two markers, named “A” and “B” are available on Bandscan page.
SB1
,
SB2
,
Left
and
Right
buttons control the visibility and position of the Markers.
Buttons
SB1
/
SB2
control Marker A / Marker B appearance. According to your needs the
markers can be:
•
Hidden – marker is not visible;
•
Shown – marker is visible but not selected;
•
Selected – marker is visible and selected.
When markers “A” and/or “B” are visible (shown or selected) a readout about X and Y axes
will appear on the left side of the data plot. If both markers are visible, the differential “Marker B
minus Marker A” value will be displayed at the bottom left of the screen. The selected marker is
represented as highlighted, dashed line; the marker’s readout is also highlighted. Only one marker
at a time can be selected. If only one of the markers is visible, it will be always selected.
Marker A is shown, Marker B is selected
Following is a diagram explaining the transition between these states:
Marker
is hidden
Marker
is selected
Marker
is shown
SB1 or SB2
press
SB1 or SB2 press
Left / Right Buttons
– move the selected marker to the left or right with one screen pixel
increment.
NOTE:
The step resolution of marker movement depends from the selected X span.
Up / Down Buttons
– are used to change the Y reference like in the Span control state.