65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 21 -
Header area
The Header is located on the left part of the screen. The header content is determined according
to the work area context and may include the following functions:
– Frequency Indicator, showing the currently selected frequency, in MHz, is located
in the upper left corner;
– Represents the currently selected active Antenna Input.
ANT 1
– Antenna 1 Input is selected.
ANT 2
– Antenna 2 Input is selected;
– Attenuator Indicator – represents the currently selected position of the active
Antenna Input. Attenuator’s position can be set manually or automatically by the device;
– Indicator for Stereophonic Information-contains information about the received
signal and currently selected de-emphasis time constant;
– Indicator for RDS presence of information contained in the received signal;
– Decoded PS information from RDS signal;
– Indicator showing the signal level at selected antenna input;
– Indicator showing the phones audio volume;
– Indicator showing the currently selected IF band-pass filter bandwidth.
Main Screen working area
The Main part of the OLED Screen is where the data changes dynamically, depending on the
selected operating mode. The Menu Screen (shown below) appears upon pressing of the “
OK
”
Navigational Button. The Radio Explorer II’s Menu Page contains selectable icons and software
buttons for selecting modes and functions. Pressing
Left
and
Right
arrow buttons will change the
icon selection on the Menu Page. The current selection is shown as a rectangle focus frame around
the icon. Pressing “
OK
” button will navigate to the corresponding page.
