65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 42 -
Front panel buttons usage:
OK
– Depending on the selected menu element can perform different actions:
•
Menu branch – transition to selected sub-menu will be made;
•
Menu parameter – when a value of a parameter is highlighted pressing
OK
will switch to
edit mode;
•
Menu complex parameter (such as Alarm) – the parameter editor screen will be shown.
Up/Down
– If edit mode is active, the value of the selected parameter will be changed. Otherwise,
are used for navigation through the menu;
Left/Right
– Change the selection when the parameter value is in edit mode;
SB4
– Return one level up or cancel edit mode.
There are several parameter types available. The way of editing depends of the parameter type.
Every parameter type has its own editing rules.
Numerical parameter
(
INT
). Represents numerical value.
Example:
The value frequency can be changed in the
range of 87.1-108 MHz (CCIR), 65-74 MHz (OIRT), 76-95 MHz (Japan) and step of 10, 20, 50
or 100 kHz.
INT
mode, front panel buttons usage:
Up/Down
– Change the value of the parameter with one step. The step value may vary depending
on the selected parameter. The value always stays in permitted parameter range;
OK
– Accept the changed value and exit edit mode;
SB4
will discard the value and cancel edit mode.
Enumerated parameter
(
ENUM
,
TZONE
). Represent the selection of a value among set of
predefined enumerated values.
Example:
The value Attenuator can be selected from
“Auto”, “OFF”, “-10dB”, “-20dB” and “-30dB”.
ENUM
mode, front panel buttons usage:
Up/Down
– Cycle through the possible values;
OK
– Accept the changed value and exit edit mode;
SB4
will discard the value and cancel edit mode.
IP address
(
IP
). Represents an IPv4 address.
Example:
,
IP mode, front panel buttons usage:
Left/Right
– Select edit marker position;
Up/Down
– Cycle through the possible values;
OK
– Accept the changed value and exit edit mode;
SB4
– Discards all changes and cancels edit mode.
IP port
(
PORT
). Represents TCP or UDP port.
Example:
IP
PORT
mode, front panel buttons usage:
Refer to “IP mode, front panel buttons usage”.
RDS Program Identification
(
PI
). Represents RDS Program Identification.
RDS
PI
edit mode, front panel buttons usage:
Refer to “IP mode, front panel buttons usage”.
