Contact Us
|
|
+1 (332) 228-1098
20
11. Clean the dust from the distribution wheel and sensors using an air
duster. Spray the air duster from left to right with a rotative circle as
shown below. Intensify the spraying around sensors. Be cautious and
always keep the nozzle 1-2 inches away from the unit.
Coin Presence Sensor (Intensify spraying around the sensor)
12. Reinstall the housing. Housing must be properly lined up with the AC
power cord at the back of the machine.
Do not force the housing while placing it back, as this could damage the coin
feed mechanism built into the housing.
13. Reinstall all three cover screws removed in the beginning of this
section.
14. Ensure all cleaned parts are dry of the cleaning agent prior to use.
15. If, after following this procedure, issues are still occurring with the
machine,
please
contact
DETECK
USA
support
team
-
for further troubleshooting.
Summary of Contents for DT100
Page 1: ......
