Contact Us
|
|
+1 (332) 228-1098
12
3.
Setting Batch quantities for coin trays
Press and hold the
“SET”
button for approximately three to five seconds
until a beep is sounded. This automatically programs each coin
denomination for coin tray amounts as follows:
IV. CLEAR BATCH QUANTITIES
You may clear all batch quantities by pressing and holding the
“-”
button for
approx. three to five seconds. The unit will make a beep sound, indicating all
batch quantities have been reset to zero.
V. WRAPPING COINS
The coin tube attachments allow you to sort coins directly into
preformed paper bank roll wrappers.
To use the coin tube attachments, perform the following steps:
1.
Remove the coin tray(s) for the denomination coins that will be using
coin tubes.
2. Insert the correct paper wrapper in the coin tubes with the folded end
down. Ensure the top of the paper wrapper is below the top lip of the
coin tube as shown in Figure 1.
3.
Attach the coin tubes to the DT100 by slowly sliding each tube into the
proper slot in the base of the machine as shown in Figures 2 and 3.
Denomination
Tray Quantity
$1
100
25¢
350
10¢
600
5¢
400
1¢
250
Summary of Contents for DT100
Page 1: ......
