Contact Us
|
|
+1 (332) 228-1098
11
Note:
When a coin tray becomes full, stop the machine and empty the tray
to ensure a trouble free counting operation. Stopping the machine will
not alter or reset the count. You can continue counting by pressing the
"START/STOP"
button.
During the count, the Aura DT100 will automatically display the total value of
counted coins on the screen and value breakdown by denomination.
II. ADDING
The machine operates in ADD mode by default, the coin count is added to the
count from previous batches. To start a new count, press the “C” button. This will
reset the coin count to Zero
III. Setting Batch Quantities:
Each denomination can be assigned a unique batch quantity.
1.
Setting Custom batch quantities
–
Press the “SET” until the desired denomination appears on the left
part of the screen.
–
To assign a batch quantity for this denomination press the “BAT”
button until a desired batch quantity appears on the display
(0, 10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500). Small adjustments
of +/- 1 to batch quantity can be made by pressing “-“ or “+” button.
–
Repeat this procedure to set the desired batch quantities for other
coin denominations.
2. Setting batch quantities for coin rolls
Press and hold the “+” button for approximately three to five seconds
until a beep is sounded. This automatically programs each coin
denomination for coin tubes as follow:
Denomination
Tube Quantity
$1
25
25¢
40
10¢
50
5¢
50
1¢
40
Summary of Contents for DT100
Page 1: ......
