Contact Us
|
|
+1 (332) 228-1098
5
This product should not be exposed to:
–
Shaky or vibrating surface
–
High temperature including but not limited to strong sunlight,
radiator or heater register. It should not be placed in a built-in
installation unless properly ventilated
–
High humidity and dust as this may damage the machine
–
Water or other liquids. In case of spilled liquid into the interior of the
machine, please stop operating, switch off and disconnect the power
cord immediately. Contact the service center of help
–
Chemical solvents such as oil, gasoline, benzene and acidic liquids. In
case of spilled liquid into the interior of the machine, please stop
operating, switch off and disconnect the power cord immediately.
Contact the service center of help
–
Any kind of objects dropped into the machine through the case slots
or openings. Especially conductive objects such as paper clips, pins,
etc.
Only use the type of cable provided with this machine. This machine
should only operate from the type of power source indicated in this user’s
guide technical parameters. If you are not sure of the type of power supply
in your location, consult your dealer or local power company.
Please contact the service center for help or refer to a qualified service
personnel under the following conditions:
–
Machine dropped or case damaged
–
Liquid spilled into the machine or exposed to rain or water
–
Power cord or plug is damaged (or frayed)
–
Machine does not operate normally after adjusting controls covered
by the operating Instructions
–
Noticeable change in performance.
SAFETY INSTRUCTIONS
Summary of Contents for DT100
Page 1: ......
