Contact Us
|
|
+1 (332) 228-1098
16
Maintenance and cleaning procedure
Standard maintenance and cleaning of the unit are important and
recommended to significantly prolong the lifespan of the product. Cleaning
the unit helps prevent issues that may lead to costly repairs. Dirty sensors can
affect the overall performance of the Aura DT100, which can lead to a variety of
errors such as El - E9 and EA codes. We suggest cleaning the unit on a regular
basis to maintain top performance. Keep the machine covered when not in use.
Items Needed
–
Can of compressed air
–
Cleaning cotton swab
–
Philips screwdriver
Steps
1.
Turn the power switch off and disconnect the power cord from the
outlet.
2. Using a Phillips screwdriver, remove the three screws located at the
bottom edge of the housing, that secure it. The picture below shows
the location of the three screws:
IMPORTANT:
Use at your own risk, DETECK USA is not responsible for any
damage to the unit and/or electronics when performing the maintenance
procedures.
Summary of Contents for DT100
Page 1: ......
