Destiny Networks Domain 3000, Getting Started

Page: 110 / 111

•
Click the "Settings" tat at the top.
•
Click the "ASCII Setup" button at the bottom.
•
Click on the top checkbox to select "Send line ends with line feeds".
•
Click OK. Click OK.
•
Send the Power On and Power Off commands from the "RS-232 Commands" page of the Device Description File
(see above).
Test the Remote Control
Perform the tests above to make sure the Domain 3000 is controlling
the AV equipment.
Test that the Remote control works properly by doing the following.
•
Make sure the RF antenna is installed on the Domain 3000 or
connected to it via the coax cable.
•
Make sure the RC-1 remote control has new batteries installed
in it. The batteries last about 4 months.
•
Open Check My Destiny by expanding the "RF and IR Inputs"
section as shown at the right. Expand the "List of commands
received".
•
Push a button on the remote control. Within 5 seconds, a new
line will appear at the bottom of the "List of commands received".
Note that if the entertainment system ever appears eratic as if many
commands are being sent to it one after another, check to see if one
of the remote controls has one of its buttons stuck in. We have not
seen the actual buttons themselves stuck in, rather we have seen
people sitting on the remote or it getting stuck in a chair, but, because
it is an RF remote, it continues to send its commands.