Destiny Networks Domain 3000, Getting Started

Page: 101 / 111

Add a Destiny Remote Control
Select the "AV Remote Control" layer of the
Design Module.
Click in the location in the room where you would
like to represent the Remote Control (since it is a
hand held device, it usually does not matter
where in the room you put it).
You will get the menu below (without the "Controlled by (and Wire to)" information filled in).
You can select the location of the remote control if you like, but it usually doesn't matter in that the remote will move around.
The default action of the buttons will work for many single room entertainment systems in that it includes the most common sources.
For example, it includes our two sources the DVD player (2nd button down in the 2nd column) and the PVR (3rd button down in the 1st
column), so all we need to do is check the checkbox labelled "Controlled by (and Wire to)" and fill in the address of the remote control.
You can find the address on the back of the remote. Type the number in the box, and click "OK".
Now this remote control will control the entertainment system.
Usually, the remote control does not need additional configuration. However, if you have 2 or more AV source components that are of
the same type, or if you want to use one of the buttons of the remote control for aspect ratio or audio mode, then you will have to
configure the AV Remote Control.