7
- Take out the key and saw o the head of the key fom marked line. You may need some tools like vice, hacksaw etc. Use
a rasp to smooth the edges. DESi accepts no liability for damages.
- Insert modified key to cylinder and verify that it is cut in a proper way.
- Install the
smart lock
on the cylinder where
the arrrows (if exist) on the key slot point upward
and the modified key is
in the position that
it can be taken out from the cylinder without rotating
(could be either horizontal or vertical.)
- First tighten 2 gripping screws and then tighten 2 fixing screws.
If your device has 2 way slot, mark the key 5 mm from the surface of cylinder.
If your device has 1 way slot, mark the key 7 mm from the surface of cylinder.
INSTALLATION (TYPE B)
Follow the steps below to install
smart lock
to the existing cylinder:
-
Insert one of exiting keys to the cylinder.
5 or 7 mm
Cut the key in accordance
with slot type of your
smart lock
.
Keep the modified key in
the position that it can be
taken out. Don’t rotate!
Install the
smart lock
to
the
cylinder. If it has 2 way slot,
the
arrows should point upward.
First, tighten 2 gripping
screws and then,
tighten 2 fixing screws.
MODIFIED KEY
MODIFIED KEY
MODIFIED KEY
