background image

24

- There can be high friction on the lock or latch bold. It may be caused by sag of the door or unadjusted locking 
mechanism. Check if you can open the lock and the latch with a key easily. If there is a problem on door or lock, that need 
to be fixed.
-  Batteries of 

smart lock

 may be weak. Recharge the batteries.

- The 

smart lock

 need to be adjusted according to the lock after installing your 

smart lock

. Please check page 12.

THE LOCK IS NOT UNLOCKED/LOCKED EVEN THE SMART LOCK IS ROTATING

- The mechanical key would be cut shorter during installation. Please check page 5 and 7 for details.
- There would be a problem related with connection between motor and rotating shaft. Call your dealer and ask for 
service.

THE CONTROLLERS CANNOT OPERATE THE

 SMART LOCK

Child lock would be activated. To deactivate child lock, press two buttons on 

smart lock

 and wait till you hear 3 short 

warning tones.

I CANNOT ADJUST THE SETTINGS OF 

SMART LOCK 

WITH MY PHONE

The phone is not enrolled to the 

smart lock

 as master controller. If you want to change the master controller of 

smart 

lock

, check “HOW TO RESET 

SMART LOCK

” topic on the page

 28

.

6.

 

TROUBLESHOOTING

SMART LOCK CANNOT FULLY LOCK/UNLOCK THE DOOR

Smart Lock Installation, Adjustments and Pairing The Smart Phone Video

https://www.youtube.com/watch?v=KF7SPaxDIws

Summary of Contents for Utopic-R OK




































Reviews: