66 15 574 D3472
D3472
.
201.20.01
.
02
03.2019
141
Sirona Dental A/S
8 Accessories
Operating Instructions DAC Universal
8.2 Printer
båÖäáëÜ
Output information Standard lid and Basket lid:
The following information is given by the printer:
● Serial number of the DAC Universal
● Program
● Cycle number
● Date (DD-MM-YYYY) and time (HH:MM:SS) (Start)
● The start time of each phase and the result “OK” or “FAIL” is printed.
The phases are:
– Start
– Leakage test
– Internal cleaning
– Lubrication / Oil care
– External cleaning
– Back-flush
– Start of holding time
Not all of these phases are included for all lid types. The ones not
included are printed as “Deactivated”.
● During the sterilization process, temperature and pressure are
measured and printed out every 30 seconds.
● Minimum and maximum temperature
● Minimum and maximum pressure
● Length of sterilization process
● The rest of the phases and the result “OK” or “FAIL” is printed. The
phases are:
– Sterilization (End time)
– Drying
– Process end
– Confirmation (User confirmation)
– Cycle end
Not all of these phases are included for all lid types. The ones not
included are printed as “Deactivated”.
If any of the phases failed, see "Errors / Display messages [ → 122]".
Summary of Contents for DAC Universal
Page 1: ...k W M3KOMN9 a r d a J s OR 8 l f b Cover page...
Page 145: ......
