4
2.2 Remaining Battery Level Indications
The remaining battery level can be checked by lighting of the indicator LED by pressing the magic key quickly.
The remaining battery level is displayed in three stages.
The indicator LED lights twice when LR6 (AA) alkaline battery is set and once when AA rechargeable nickel hydride battery
is set.
Battery level 40% or more
Lights in green.
39% to 10%
Lights in orange.
Less than 10%
Lights in red.
Note
:
The remaining battery level is not an accurate indicator.
Use this purely as an approximate indicator.
Set the battery type correctly.
2.3 Turning the Scanner On and Off
Turning the scanner on
When the scanner is turned off, pressing the magic key will start the Bluetooth
®
wireless link. Using the scanner when the
“End operation” is selected requires scanning the “Start operation” QR Code symbols given in Section 11.2 with the
procedure in Section 11.1. (When the scanner is turned on, pressing the trigger switch will start the Bluetooth
®
wireless link.)
Turning the scanner off
When the scanner is not used for a long time, turn the scanner off by holding the trigger switch and the magic key down for
three seconds or more.
Auto power-off
The timeout period for automatically turning the scanner off when it has not been used for a long time can be set within the
range 5 to 640 minutes in 5-minute increments. Auto power-off can also be set to disabled. This function can be set up only
on the configuration software (Scan Tune App).
