Denso QB30-SR, User Manual

Page: 34 / 139

8.1.2.4 Verification result output
This is set using the commands, menu, or configuration software (QB Setting). The verification result output format can be
selected from the following four patterns.
When Verification Successful When Verification Unsuccessful
Pattern 1 “OKnn” “NGnn”
Pattern 2 “OKnn” + <data> “NGnn”
Pattern 3 “OKnn” “NGnn” + <data>
Pattern 4 “OKnn” + <data> “NGnn” + <data>
“nn” will be the designated verification master number if a verification master has been designated. If no verification master
has been designated and a verification is made using all masters, the successful master number will be the designated
verification master number when verification is successful, and “00” when verification is unsuccessful.
(Note) 1.Multi-line barcode scanning with the data verification mode
Master data registration

To register a multi-line barcode as a master code, each code mark in each row shall be matched for the success
of master data registration.
The definition of code marks complies with Type 1(DENSO1) described in section 12-4.

If a multi-line barcode is registered as a master code, the concatenated data is registered by the master data in the
same order as the scanning of code data.
Scan data verification

To scan a multi-line barcode, all the code marks in respective rows shall be matched for a successful scanning. If
this is not satisfied, it is regarded as data mismatching irrespective of the type of scanned data.
The definition of code marks complies with Type 1(DENSO1) described in section 12-4.
(Note) 2.A QR structured append code and an iQR structured append code scanning with the data verification mode
Master data registration
In registering a structured append code as a master code, the scan data is registered in the master code after all the
divided codes are scanned with the Edit mode and Batch edit mode, while in the Unedited mode the data is registered
each time a symbol block is scanned. In this case, the code block number, the total number of code blocks and the parity
data are not registered as master data.
Scan data verification
If the scan code is a QR structured append code, the scanned data is compared against the master data after scanning
of all divided codes is complete when in Edit mode or Batch edit mode. When in the Unedited mode, however, scan data
for each divided code is compared against the master code.
23