Denso QB30-SR, User Manual

Page: 36 / 139


Extraction start and end positions
"Extraction start position" "Extraction end position"
Head position
Tail position
n
th position
Tail position
By
n
positions from the start
position
n
th position
n
th position
The
n
can be 1 through 9999. Note that if the extraction start position is specified as
n
th position, the extraction end position
should be equal to or greater than the extraction start position.
Note:
The number of characters for Code 39 symbols should be specified including start and stop codes.
Example Code read: QR Code, Data: 12345,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Type 1,
Transmission of the number of digits: Enable, Prefix/Suffix: None, BCC: Disable
Extraction conditions Extraction start position
Extraction end
position
Output data
Head position 3rd position [STX]Q0003123[ETX]
Tail position 3rd position [STX]Q0003345[ETX]
1st position Tail position [STX]Q000512345[ETX]
1st position By 3 positions [STX]Q0003123[ETX]
2nd position 4th position [STX]Q0003234[ETX]
Head position 6th position Error
Tail position 6th position Error
6th position Tail position Error
6th position By 10 positions Error
"Code type": QR Code
"Data transfer regardless
of error result": Prohibit
1st position 6th position Error
Head position 6th position [STX]Q000512345[ETX]
Tail position 6th position [STX]Q000512345[ETX]
6th position Tail position [STX]Q000512345[ETX]
6th position By 10 positions [STX]Q000512345[ETX]
"Code type": QR Code
"Data transfer regardless
of error result": Permit
1st position 6th position [STX]Q000512345[ETX]
"Code type": PDF417
"Data transfer regardless
of error result": Prohibit
Invalid if specified.
Invalid if
specified.
Error
"Code type": PDF417
"Data transfer regardless
of error result": Permit
Invalid if specified.
Invalid if
specified.
[STX]Q000512345[ETX]
25