Denso BHT-700QWB-CE, User Manual

Page: 97 / 182

79
2D Code Handy Terminal
[2] Beeper/Vibration
Double-tap “Beeper/Vibration” at the System Properties screen to display
the screen on the right.
This menu is used to adjust the beeper volume and switch between the
beeper and vibrator.
Adjusting the Beeper Volume
Sets the beeper volume for each operation.
Beeper:
Select the beeper volume from 0 (low) to
5 (high). (Default: 5)
Key clicks: Select the beeper volume when a key is
pressed. (Default: Loud)
Screen taps Select the beeper volume when screen
is tapped. (Default: Loud)
Trigger key clicks*: Beeper setting when the trigger switch is
pressed. (Default: OFF)
* The trigger switch can be assigned to magic keys.
Switching between the Beeper and Vibrator
Select one of the following three patterns for notification of code scanning
completion.
Beeper: Beeper
only (default)
Vibration: Vibrator only
Beeper/Vibration: Simultaneous beeper and vibrator