Denon RBD-X1000, Service Manual

Page: 88 / 100

88
Terminal Function
SLES071A − MARCH 2003 − REVISED JANUARY 2004
www.ti.com
6
Terminal Functions
TERMINAL
I/O DESCRIPTIONS
NAME PIN
I/O DESCRIPTIONS
AGNDC 16 − Analog ground (internal bias and current DAC)
AGNDF 9 − Analog ground (DACFF)
AGNDL 19 − Analog ground (L-channel I/V)
AGNDR 11 − Analog ground (R-channel I/V)
BCK 2 I Bit clock input (1)
DATA 3 I Serial audio data input (1)
DGND 8 − Digital ground
LRCK 1 I Left and right clock (fS) input (1)
MC 27 I Mode control clock input (1)
MDI 26 I/O Mode control data input (2)
MDO 25 O Mode control readback data output (3)
MS 28 I/O Mode control chip select input (4)
MSEL 24 I I2C/SPI select (1)
MUTE 4 I Analog output mute control (1)
RST 6 I Reset (1)
SCK 5 I System clock input (1)
VCCC 15 − Analog power supply (internal bias and current DAC), 5 V
VCCF 21 − Analog power supply (DACFF), 5 V
VCCL 20 − Analog power supply (L-channel I/V), 5 V
VCCR 10 − Analog power supply (R-channel I/V), 5 V
VCOM 14 − Internal bias decoupling pin
VDD 7 − Digital power supply, 3.3 V
VOUTL+ 17 O L-channel analog voltage
VOUTL– 18 O L-channel analog voltage output –
VOUTR+ 13 O R-channel analog voltage
VOUTR– 12 O R-channel analog voltage output –
ZEROL 23 O Zero flag for L-channel
ZEROR 22 O Zero flag for R-channel
(1) Schmitt-trigger input, 5-V tolerant
(2) Schmitt-trigger input and output. 5-V tolerant input. In I2C mode, this pin becomes an open-drain 3-state output; otherwise, this pin is a CMOS
output.
(3) 3-state output
(4) Schmitt-trigger input and output. 5-V tolerant input and CMOS output