ENGLISH
15
8 SEAMLESS LOOP/HOT START/STUTTER
★
Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound).
★
Two A points and one B point can be set.
★
The data of the A points can be used for the hot start and stutter functions.
1
2
3
Start playback.
Press the PLAY/PAUSE button.
Load the start point (A).
Press the A-1 (or A-2) button.
Set the end point (B).
Press the B (B-LOOP) button.
• The seamless loop mode is set as soon as point A is set.
• The “
” indicator lights and “LoadA” is displayed
on the character display while the A point data is being
loaded.
✽
The seamless loop mode cannot be set when in the next
track mode. If you wish to set it, turn the next track
mode off.
✽
Data cannot be loaded for both A1 and A2 at the same
time.
✽
Depending on the conditions, it may not be possible to
load points A1 and A2. In this case, “Not Load” is
displayed.
LOCK
A
1
2
1
2
LOOP
B
A1 B
A2 B
Lit
Lit
Lit
Lit
or
or
When the end point (B) is set, the
disc is played from the start point
(A) with no break.
After this, the disc is played from
the start point (A) to the end point
(B) with no break.
Start point
End point
Start point
End point
Seamless loop
• If the B (B-LOOP) button is pressed again after the B
point has been set, the B point is reset (moves).
• Whenever the A-1 (or A-2) button is pressed while in the
seamless loop mode, playback starts over from the A
point.
• When point B is set for point A-1 and the A-2 button is
pressed, point B is cleared. In the same way, when point
B is set for point A-2 and the A-1 button is pressed, point
B is cleared.
Starting seamless loop playback
Temporarily canceling seamless looping
4
Press the EXIT/RELOOP button during seamless looping.
(EXIT mode)
EXIT
EXIT
Flashing
Lit
Start point
End point
• When the end point (B) is reached, playback continues,
without returning to the start point (A).
Replaying a seamless loop
5
Press the EXIT/RELOOP button or the B (B-LOOP) button
during normal playback. (When the B (B-LOOP) button is
pressed, that point is set as the new loop end point (B).)
B
Start point
End point
• Playback returns to the start point (A) and seamless
looping resumes.
Press the EXIT/RELOOP
or B button.
Clearing the start (A) and end (B) points
6
While pressing the LOOP (FLIP) button, press the A button
you want to clear (A-1 or A-2) for at least 2 seconds.
LOOP
A
1
2
A1 B
A2 B
1
2
• The A-1 point (or A-2 point) and the B point are cleared.
Off
Off
or
Off
Off
or
NOTE:
• When the disc holder is opened, the start (A) and end (B)
point settings are cleared.
Lit