Get
ting Star
ted
Connections
Set
tin
g
s
Remot
e Contr
ol
ZONE2
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
The channel switches continuously when
[TUNING]
is pressed and
held.
The song title, artist name, composer name, category and reception
level can be checked by pressing
<STATUS>
.
The time (default : 30 sec) for which the GUI menu are displayed can
be set “GUI” – “Tuner” (
v
page 41).
Press
uio
p
to return to
the original screen.
•
•
•
1
Set
[DEVICE SELECT 1]
to “MAIN/TV” and
[DEVICE
SELECT 2]
to “MAIN”.
2
Press
[SOURCE SELECT]
to display the GUI Source
Select menu, then select “
” (
v
page 26).
3
Use
[TUNING]
to select the channel.
When the channel is tuned in, the name of the song and artist
are displayed.
4
Adjust the items below.
Adjusting the master volume
(
v
page 65)
Selecting the surround mode
(
v
page 67)
Adjusting the Sound and Picture Quality
(
v
page 69)
n
n
n
Listening to SIRIUS Satellite Radio
The strength of both the SIRIUS satellite and terrestrial signals can be
checked “Antenna Aiming” (
v
page 50).
Checking the SIRIUS Signal Strength and Radio ID
1
Press
<STATUS>
until “SIGNAL” appears on the
display.
The display will switch as shown below, depending on the
reception conditions.
Display
Status
EXCELLENT
Signal strength is excellent
GOOD
Signal strength is good
WEAK
Signal strength is weak
NO SIGNAL
No signal
2
Adjust the position of the antenna until “SIGNAL:
EXCELLENT” is shown on the display.
3
Press
<STATUS>
until the channel (example:
“SR001”) is displayed.
4
Press
[TUNING]
and select channel 0 (SR000).
Channel No. and Sirius ID are alternately shown on the display.
SR000 SiriusID
************
Write your own SIRIUS ID for storage use.
Sirius ID :
b
Sirius ID
When operating SIRIUS with the AVR-990 via the remote control unit,
use
[SAT TU]
.
Tuning in Radio Stations – SIRIUS Satellite Radio
Presetting Radio Channels (Preset Memory)
Your favorite broadcast channels can be preset so that you can tune
them in easily. Up to 56 channels can be preset.
To preset other channels, repeat steps 1 to 4.
NOTE
Preset channels are erased by overwriting them.
Listening to Preset Channels
You can also operate via the main unit. In this case, perform the
following operations.
Press
<TUNING PRESET>
, then turn
<SOURCE SELECT>
to select the
preset radio channel.
Press
[CHANNEL]
to select the desired preset channel,
then press
ENTER
.
1
Tune in the broadcast channel you want to preset.
2
Press
[MEMORY]
.
3
Press
[SHIFT]
to select the block in which the channel
is to be preset, then press
[CHANNEL]
to select the
preset number.
4
Press
[MEMORY]
again to complete the setting.
Pla
ybac
k
