Denon AV SURROUND RECEIVER AVR-891, Owner'S Manual

Page: 27 / 88

24
ENGLISH
Tuning in radio stations
Listening to FM/AM broadcasts
1
Press
TUNER
to switch the input
source to “TUNER”.
2
Press
BAND
to select “FM” or
“AM”.
FM
When listening to an FM broadcast.
AM When listening to an AM broadcast.
3
Tune in the desired broadcast
station.
q To tune in automatically
(Auto tuning)
Press
MODE
to light the “AUTO” indicator on the display, then
use
TUNING
d or
TUNING
f to select the station you want to
hear.
w To tune in manually (Manual tuning)
Press
MODE
to turn off the display’s “AUTO” indicator, then use
TUNING
d or
TUNING
f to select the station you want to hear.
n
Tuner (FM/AM) operation
Operation buttons Function
CH +, – Preset channel selection
MENU Amp menu
uio p
Cursor operation
ENTER Enter
SEARCH
Direct frequency tuning
RETURN
Return
BAND
FM/AM switching
MODE Switch search modes
TUNING
df
Tuning (up/down)
0 – 9
Preset channel selection (1 – 8) /
Direct frequency tuning (0 – 9)
SHIFT Preset channel block selection
MEMORY Preset memory registration
TV POWER TV power on/standby (Default : SONY)
TV INPUT Switch TV input (Default : SONY)
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING
d or
TUNING
f
to change frequencies continuously.
• The time (default : 30 sec) for which the menus are displayed can
be set at menu “TUNER” (
v
page 61). Press uio p to return to
the original screen.
n
Listening to preset stations
1
Press
SHIFT
to select the memory
block (A to G).
2
Press
CH +
,
CH –
or
1 – 8
to select
the desired preset channel.
You can also operate via the main unit.
In this case, perform the following
operations.
Press
TUNING PRESET
, then turn
SOURCE
SELECT
to select the preset radio station.
n
Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH .
2
Input frequencies using the
0
–
9
.
• If
o
is pressed, the immediately preceding
input is cancelled.
3
When setting is completed, press
ENTER
.
The preset frequency is tuned in.
n
Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at “Auto Preset”
(
v
page 45). If “Auto Preset” is performed after performing “Manual
Preset”, the “Manual Preset” settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
Press
MEMORY
.
3
Press
SHIFT
to select the block (A
to G) in which the channel (1 to 8
per a block) is to be preset, then
press
CH +
,
CH –
or
1 – 8
to select
the preset number.
4
Press
MEMORY
again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
Default settings
Block (A – G)
and
Channel (1 – 8)
Default Settings
A1 – A8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 – B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 – C8 90.1 MHz
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a name for the preset broadcast station
(Preset Name) (
v
page 46)