37
ENGLISH
Basic version
Simple version
Information
Advanced version
Convenient functions
Sleep timer function
The power automatically goes into standby once the set time has
elapsed.
This is convenient for playing sources while going to sleep.
Press
SLEEP
and display the time you
want to set.
The
indicator on the display lights.
• The time switches as shown below each
time
SLEEP
is pressed.
OFF
10 min
20
30
40
50
60
80
70
90
100
110
120
To cancel the sleep timer
Press
SLEEP
to set “OFF”.
The
indicator on the display turns off.
• The sleep timer setting is canceled if this unit’s power is set to
standby or turned off.
• When power to the main zone is
turned off with the sleep timer,
power in ZONE2 is also turned off.
• If
SLEEP
on the main unit is pressed,
the same function as with the
remote control unit can be obtained.
Adjusting the volume of the speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
n
Adjusting the volume of the different speakers
1
Press
ZONE SELECT
to switch the
zone mode to “MAIN”.
The “MAIN” indicator lights.
2
Press
AMP
to set the remote
control unit to amplifier operation
mode.
3
Press
CH LEVEL
.
Front L
Front R
Center
Subwoofer
Surround L
Surround R
S.Back L
S.Back R
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
CHANNEL LEVEL
Select
Front
Rear
4
Use
ui
to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
5
Use
o
p
to adjust the volume.
• In the case of a subwoofer, pressing
o
when it is at “–12 dB” will
change the setting to “OFF”.
When a headphone jack is inserted, the headphone channel level can
be adjusted.
n
Adjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the
front (front speaker / front height speaker / center speaker) or rear
(surround speaker / surround back speaker).
1
Press
ZONE SELECT
to switch the
zone mode to “MAIN”.
The “MAIN” indicator lights.
2
Press
AMP
to set the remote
control unit to amplifier operation
mode.
3
Press
CH LEVEL
.
Front L
Front R
Center
Subwoofer
Surround L
Surround R
S.Back L
S.Back R
Fader
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
CHANNEL LEVEL
Select
Front
Rear
4
Use
i
to select “Fader”, then select the item to be
adjusting using
o
p
.
5
Use
o
p
to adjust the volume of the speakers.
(
o
: front,
p
: rear)
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
