Denon 5805 - AVR AV Receiver, Operating Instructions Manual

Page: 85 / 214

85
Advanced Operation
1
Press and hold the
RC SETUP
button for at
least 3 seconds.
• The IR segment blinks twice.
2
Press the
9
,
7
,
8
button (9
→ →
7
→ →
8) in that order.
• The IR segment blinks twice and the system call
registration mode is set.
3
Press the
SYSTEM CALL
button (
1
,
2
or
3
) for
which you want to register the operations.
4
Press the buttons you want to register in the
order of the operations to be performed.
Example: Press the ON button.
↓
Press the CD button of the MODE
SELECTOR button.
↓
Press the 1 button.
The mode can be switched by pressing a MODE
SELECTOR button.
5
Repeat steps 3, 4 to register the desired
buttons.
6
Press and hold the
RC SETUP
button for at
least 3 seconds.
• The IR segment blinks twice and the setting is
completed.
1
Press the
AMP
button to select “SYSTEM
CALL”.
2
Press the
SYSTEM CALL
button (
1
,
2
or
3
) at
which the operation are registered
• The stored signals are transmitted successively.
2
Press the
9
,
8
,
4
button (9
→ →
8
→ →
4) in that order.
• The IR segment blinks twice and the punch through
setting mode is set.
3
Press the
MODE SELECTOR
button for the device
to be punched through (CD, DVD or VCR).
4
Press the button to be punched through ( 1 , 2 ,
6 , 7 , 8 , 9 or
3
).
5
Press the
MODE SELECTOR
button for the
device to be punched through (TV or SAT/CBL).
6
Press and hold the
RC SETUP
button for at
least 3 seconds.
• The IR segment blinks twice and the setting is
completed.
1
2
Press and hold the
RC SETUP
button for at
least 3 seconds
• The IR segment blinks twice.
Press the
9
,
7
,
3
button (9
→ →
7
→ →
3) in that order.
• The IR segment blinks twice and the backlight
lighting time setting mode is set.
Setting the back light’s lighting time
3
Press the
NUMBER
button
of
(
1
to
5
) you want
to set the lighting time.
• The IR segment blinks twice.
Lighting time: 1 : 5 sec
2 : 10 sec (factory default)
3 : 15 sec
4 : 20 sec
5 : 25 sec
• CD, DVD or VCR mode buttons can be assigned to unused
TV and SAT/CBL mode buttons.
• For example, when DVD mode operations are assigned to
TV mode buttons, the DVD mode can be operated while in
the TV mode.
1
Press and hold the
RC SETUP
button for at
least 3 seconds.
• The IR segment blinks twice.
Setting the punch through function
• The brightness of the display can be adjusted in 5 steps
(Default : level 3).
• First set the auto brightness adjustment setting to “OFF”.
1
Press and hold the
RC SETUP
button for at
least 3 seconds.
• The IR segment blinks twice.
2
Press the
CHANNEL
button.
• Press the + button to increase the brightness 1 step.
• Press the – button to decrease the brightness 1 step.
Setting the brightness
2 Registering
2
Operating