Denon 5805 - AVR AV Receiver, Operating Instructions Manual

Page: 138 / 214

138
Advanced Setup – Part 1
• If you are using a broadband router (DHCP function), there is no need to make the settings at “Setting the IP Address” and
“Setting the Proxy”, since the DHCP function is set to “ON” in the AVR-5805CI’s default settings.
• If the AVR-5805CI is being used connected to a network without the DHCP function, the network settings must be made. In
this case, some knowledge of networks is required.
1
Press the
CURSOR D D
or
H H
button to select
“Network Setup” at the “Option Setup” menu,
then press the
ENTER
button.
• The “Network Setup” screen appears.
2
Press the
CURSOR D D
or
H H
button to select “IP
Address”, then press the
ENTER
button.
• The “IP Address” screen appears.
3
Press the
CURSOR
F F
or
G G
button to select
“OFF”.
• The DHCP function is disabled.
4
Press the
CURSOR D D
or
H H
button to select the
desired setting item, then press the
CURSOR
G G
button and
CURSOR D D
or
H H
button to input
the address.
IP Address:
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if
other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask:
When connecting an xDSL modem or terminal
adapter directly to the AVR-5805CI, input the subnet
mask indicated in the documentation supplied by
your provider. Normally input 255.255.255.0.
Gateway:
When connected to a gateway (router), input its IP
address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the
documentation supplied by your provider, input it at
“Primary DNS”. If there are two or more DNS
addresses, input the first one at “Second DNS”.
5
Press the
ENTER
button to enter the setting.
• The “Network Setup” menu reappears.
• DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other
network settings are automatically set for the AVR-5805CI,
computer, broadband router and network devices.
• DNS (Domain Name System):
This is a system for converting the domain names used
when browsing Internet sites (for example,
“www.denon.jp”) into the IP addresses actually used for
communications (for example, “202.221.192.106”).
Setting the Network Setup
2
Setting the IP Address
Set this when “OFF” is set for “DHCP”.
The IP address, etc., is not displayed when “DHCP” is
set to “ON” and the unit is not connected to a
network.