Denon 5805 - AVR AV Receiver, Operating Instructions Manual

Page: 126 / 214

126
Advanced Setup – Part 1
Option Setup
• Make other expert settings.
Setting the Channel Setup
• With this setting it is possible to change the number of
channels played in the different zones according to the
purpose.
The AVR-5805CI is equipped with pre-out terminals for a
total of 22 channels.
16 channel of these pre-out terminals can be assigned
between the MAIN ZONE and ZONE2 (Theater). In addition,
up to three channels of subwoofers can be added to the
MAIN ZONE, so subwoofers can be set in the front and back
or at the sides. The number of channels output from the pre-
out terminals exclusively for ZONE2, 3 and 4 can be set to
“MONO” or “STEREO” according to the method of
playback in the various multi-zones.
1
Press the
CURSOR
D D
or
H H
button to select
“Option Setup” at the “System Setup Menu”,
then press the
ENTER
button.
• The “Option Setup” menu appears.
3
Press the
CURSOR D D
or
H H
button to select the
zone, then press the
CURSOR
F F
or
G G
button to
select the channel setting.
Refer to the table on page 127.
4
Press the
ENTER
button to enter the setting.
• The “Option Setup” menu reappears.
2
Press the
CURSOR D D
or
H H
button to select
“Channel Setup”, then press the
ENTER
button.
• The “Channel Setup” screen appears.
2 Channel setup flow
Set the number of channels for the MAIN ZONE’s main channel.
The number of channels that can be set for ZONE2 depends of the
number of channels in the MAIN ZONE. See the table on page 127.
Set the number of subwoofer channels for the MAIN ZONE.
Set the number of channels for the ZONE2.
Set the number of channels for the ZONE3.
Set the number of channels for the ZONE4.