52
Basic Operation
• In addition, screen information is displayed in the following
order when the
ON SCREEN
button is pressed repeatedly:
OSD-1
Audio input signal
OSD-2
Monitor information
OSD-3
Input/output
OSD-4
Auto surround mode
OSD-5
USER MODE 1
OSD-6
USER MODE 2
OSD-7
USER MODE 3
OSD-8~14
Tuner preset stations
NOTE:
• OSD-2:
The monitor’s resolution is displayed when an HDMI
monitor is connected to the AVR-5805CI.
• OSD-4:
This is displayed when the auto surround mode is set to
“ON” (
page 117) and the input mode is set to
“AUTO”.
It is not displayed when the input mode is set to
“ANALOG” or “EXT. IN”.
2
Surround parameters
q
MODE/SB CH OUT:
Select the surround back channel playback method or
mode.
•
ON:
This is the recommended play mode for using the surround
back channel when DTS NEO:6 is selected.
•
OFF:
This is the recommended play mode when Dolby Pro Logic
II
is selected. The surround back channel is not played.
DECODER:
Select the decoder to be used when playing 2 channel
sources in the Home THX Cinema mode.
•
PL
II
x C:
The signals are decoded in the Dolby Pro Logic
II
x Cinema
mode before undergoing THX processing.
•
PL
II
C:
The signals are decoded in the Dolby Pro Logic
II
Cinema
mode before undergoing THX processing.
•
PL:
The signals are decoded in the Dolby Pro Logic mode
before undergoing THX processing.
•
NEO:6 C:
The signals are decoded in the NEO:6 Cinema mode before
undergoing THX processing.
2
Checking the input signal
• The input signal can be checked by pressing the remote
control unit’s
ON SCREEN
button.
SIGNAL:
Displays the type of signal (DTS, DOLBY DIGITAL, PCM,
etc.).
fs:
Displays the input signal’s sampling frequency.
FORMAT:
Displays the input signal’s number of channels.
“Number of front channels/Number of surround
channels/LFE on/off”
“SURROUND” is displayed for 2 channel signal sources
recorded in Dolby Surround.
OFFSET:
Displays the dialog normalization offset value (
page
55).
FLAG:
Displays the special identification signal recorded in the
input signal.
“MATRIX” is displayed if the input signal has undergone
matrix processing, “DISCRETE” is displayed if the input
signal has undergone discrete processing.
Not displayed when no identification signal is recorded.
Summary of Contents for 5805 - AVR AV Receiver
Page 1: ...AV SURROUND RECEIVER AVR 5805CI OPERATING INSTRUCTIONS ...
Page 212: ......
Page 213: ......
