Denon 5805 - AVR AV Receiver, Operating Instructions Manual

Page: 118 / 214

118
Advanced Setup – Part 1
Setting the Manual EQ Setup
1
Press the
CURSOR
D D
or
H H
button to select
“Manual EQ Setup” at the “Advanced
Playback” menu, then press the
ENTER
button.
• The “Manual EQ” screen appears.
2
Press the
CURSOR F F
or
G G
button to select the
adjustment mode, then press the
ENTER
button.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers
can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3
Press the
CURSOR F F
or
G G
button to select the
speaker to be set.
Example: When “L/R CH” is selected.
The display changes as follows.
FL/FR
SBL/SBR
C SLA/SRA
SLB/SRB
w
Select the “Each CH”
FL
SBR
1spkr
FR C SLA
SLB SRB SBL
SRA
SB
q
Select the “L/R CH”
When the surround back speaker setting is set to
“1spkr” at “Speaker Configuration”, this is set to
“SB”.
e
Select the “All CH”
In this case, speaker selection is not performed.
If a value is already set for the FL channel, the data
stored for the FL channel is displayed.
4
Press the
CURSOR D D
or
H H
button to select the
frequency, then press the
CURSOR
F F
or
G G
button to adjust the gain level.
Each frequency can be adjusted the range from –20.0
dB to +6.0 dB in 0.5 dB step.
5
Press the
ENTER
button to enter the setting.
• The “Manual EQ” screen reappears.
6
Press the
CURSOR D D
or
H H
button to select
“Exit”, then press the
ENTER
button.
• The “Advanced Playback” menu reappears.
• Allows you to adjust the tonal quality of the various speakers
(except the subwoofer) while listening to a music source.