Denon 5805 - AVR AV Receiver, Operating Instructions Manual

Page: 114 / 214

114
Advanced Setup – Part 1
• “Color Space” and “RGB Mode Setup” are only displayed
when “Analog to HDMI Convert” is set to “ON”.
• When connecting to an HDCP compatible monitor equipped
with DVI-D terminal using an HDMI/DVI-D converter cable,
the signals are output in RGB format, regardless of the
“Color Space” setting.
• To view the on screen display using an HDMI monitor, set
“Analog to HDMI Convert” at “HDMI/Component Out” to
“ON” (default).
• Set the resolution of the video output to one that is
compatible with the resolution of your monitor.
• When “Scaler” is set to “Component” and the video input
signal includes copyright protection data, the signal is output
from the component video output terminal with a resolution
of 480p/576p even if “Resolution” is set to “1080i” or
“720p”.
Setting the Audio Delay
• Set the audio delay timing to synchronize the sound and
video.
1
Press the
CURSOR
D D
or
H H
button to select
“Audio Delay” at the “Video Setup” menu,
then press the
ENTER
button.
• The “Audio Delay” screen appears.
2
Press the
CURSOR
F F
or
G G
button to set the
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors’ lips is synchronized with the
sound.
3
Press the
ENTER
button to enter the setting.
• The “Video Setup” menu reappears.
• The audio delay setting does not apply when playing in the
EXT. IN mode or in the analog input DIRECT mode or
STEREO mode (only when the crossover frequency is set to
“FIXED–THX–” or front speaker is set to “Large” (TONE
DEFEAT “ON”, Room EQ “OFF”).