demi 1296-144 CK, User Manual

Page: 15 / 18

/Kits/1296-144CK.doc 15 8/15/2011
BAG 4 CONTENTS:
Note that all filters (F1-F5) are pre-installed in your PCB.
Q1 2N5179 D9 1N914 IC6 MAR3
Q2 2N5179 F1 112570C - Installed IC7 MAV11
Q3 ATF34143 F2 112570C - Installed IC10 AH31
Q4 KN2222 F3 123080C- Installed VR1 78S09
D1 1N4000 type F4 123080C - Installed VR3 78S09
D2 MPN3404 F5 123080C- Installed VR4 78M05
D3 MPN3404 IC1 ERA3 K1 RK1-12
D4 HSMP 3814 IC2 ERA2 K2 G5V-2
D5 1N4000 type IC3 ERA5 K3 G6Y-1
D6 1N914 IC4 SYM-14H PTC1 PTC 60 Thermistor
D7 1N4000 type IC5 ERA 50 Y1 Crystal 192.000 MHz HC 18/U
D8 1N914
HARDWARE
(2) 1000
ρ
F leaded R36 THC 50
Ω
, 10 W Load
(1) Type ¾” "N" connector SW1 Power Switch
(2) SMA connectors (1) Shield- Prepped
(2) BNC Female UG1094/U Connectors (3”) #18 Teflon wire
(3) RCA Jacks (Control, Aux., Power) (3’) #24 Teflon wire
(4) 4-40 x 3/16” Screws (20”) Coax
(2) 4-40 x 3/8" Screws (1) 3/8” Hole Plug
(4) 3-48 x 3/16” Screws (4) Adhesive Backed Rubber Feet
(4) 3-48 x 3/8” Screws (1) Set of Labels
(5) 4-40 x 1/4” Screws (1) 1/4” Plate
(6) 4-40 x 7/16” Screws (1) Switch Panel
(2) 4-40 Nuts (1) Connector Panel
(2) #4 flat washers (8) Flat Head
(2) #4 lugs (1) Machined Enclosure
(2) LED, RED (1) Thermal Compound
(2) 4-40 x 1/8” Screws
Miscellaneous Loose Parts if required in you kit (1) RF Power Module IC9, M67715. (2)
Printed Circuit Board with filters
installed. (3) Enclosure, two halves.