45
IMSK2 (Figure 17)
!
Always disconnect the power cord before
assembling the MiniStitcher or making any adjustments.
CAUTION
!
Figure 17 - IMSK2 Contact
MG10049A
MG10164
MG10078
PG10295 (2)
For those applications which require it, the Contact Trip Kit (IMSK2) is available for the
MiniStitcher. Call your DeLuxe Stitcher Graphic Arts Representative for more information.
The IMSK2 Contact Trip Kit can be mounted directly onto the MiniStitcher. The Kit can also
be used in conjunction with the IMSK3 Work Table Kit by following the assembly instructions
included with the Work Table Kit.
Loosen the Thumb Screw (P2731) which secures the solid Backstop (MG10176) until the Backstop
can be removed from the Clincher Arm. Position the IMSK2 Contact Trip Assembly on the Clincher
Arm so that the silver Contact Trip Slide (MG10164) is facing the Solid Clincher Plate (MG10078).
Position the Contact Trip Assembly along the length of the Clincher Arm until it fits the application
and tighten the two (2) Thumb Screws (PG10295) to secure it.
Plug the Trip Switch Plug Assembly (MG10049A) into the receptacle located on the bottom of
Summary of Contents for IMSHP-A25
