DeLuxe Stitcher IMSHP-A25, Operation And Maintenance Manual

Page: 5 / 56

The DeLuxe Stitcher MiniStitcher HP is a table-top version of the StitchMaster. A
completely portable stitcher, the MiniStitcher is ideal for closing padded envelopes,
carding, and blister packs.
The IMSHP-A25 which operates on 115VAC and conforms to all pertinent CE
standards. All other performance characteristics are the same.
The MiniStitcher comes standard with parts for 25 gauge or smaller round wire.
However, any MiniStitcher can be modified to accommodate any of the following wire
sizes: 23 or 24 gauge round or 21 x 25 flat. In addition, the MiniStitcher can be
ordered with these alternative wire size parts directly from your DeLuxe Stitcher
Graphic Arts Representative.
The MiniStitcher has a capacity up to 1/8” (3.2mm) or thirty sheets of 20 pound bond
paper with 25 gauge round wire and up to 1/8” (3.2mm) or thirty sheets of 20 pound
bond paper with 21x25 flat wire. It accommodates flat stitching only with a solid
Clincher but easily adjusts to control both work thickness and centering the stitch.
The MiniStitcher’s foot switch provides for easy operation in either single or
continuous stitch modes at the touch of a button. It can be placed on any sturdy work
surface and plugs into any standard wall outlet.
The MiniStitcher has a 9” (22.9 cm) throat depth for flat stitching. The overall height
of the stitcher is 24” (61.0 cm) and the depth is 13” (33 cm). The width is 9” (22.9
cm) including the base.
The IMSHP-A25 weighs 36 lbs. (16.2 kgs.). The shipping weight including the
stitcher, the wire spool, and the foot switch is approximately 50 lbs. (22.7 kgs.).
Introduction
3