DeLUX MOISTURE Link G2 DP, Operation Manual

Page: 22 / 322

STARTUP PROCEDURE
3
5.2. After the screen appears, move and hold the POWER SWITCH to the START position.
This proves the PRIMARY SAFETY circuit so the dryer can start. If the PRIMARY SAFETY
circuit
doesn’t check, the message “CHECK SAFETY CIRCUIT! TURN ALL SWITCHES TO
OFF POSITION” will appear. Check to m ake sure that all the PRIMARY SAFETY
indicators are illuminated and all of the switches (other than the power switch) are in
the OFF position.
5.3. If the PRIMARY SAFETY circuit checks the HMI screen displays the HOME PAGE is
shown.
6) To fill with wet grain
6.1.
Move LOAD OPERATION switch to the ON position. The load system circuit will be
activated and will fill the dryer. When the dryer is full of grain, the high grain shutdown
will shut off all of the loading equipment automatically. (Leave LOAD OPERATION in
"ON" position.) The filling cycle will continues as long as the LOAD OPERATION switch
remains ON and the dryer is discharging grain. The DRYER FILL indicator on the HOME
SCREEN will be illuminated when the fill cycle is in process.
7) To start fan(s)
7.1.
Move and hold the fan switch to the START position until all fans start, then release
to the RUN position. A three second delay between fans starting should be expected.
20