DeLUX MOISTURE Link G2 DP, Operation Manual

Page: 56 / 322

GENERAL OPERATION
2 9
SHUTDOWN PROCEDURE
1.
Move Unload Operation selector switch to "OFF" position.
2.
Move load switch to "OFF" position.
4.
Move burner switch to "OFF" position. Holding the power switch to "START" position
momentarily while moving the burner switch to the "OFF" position will allow fans to
continue to run
. Otherwise moving burner switch to "OFF" position will shutdown
entire dryer and restart of fans will be necessary to cool grain.
Note : To clear the lines of fuel - turn "OFF" fuel supply at tank or dryer with burner switch in
"ON" position. As soon as pressure gauge on dryer drops to zero, immediately switch
burner switch to "OFF" as noted above to avoid burner safety lockout.
5.
After dryer has cooled approximately 30 minutes and plenum thermometer reads
ambient temperature conditions, move power switch to "OFF".
6.
Turn "OFF" manual fuel supply to dryer.
7.
Return all switches to "OFF" position.
EMERGENCY SHUTDOWN
1. Activate EMERGENCY STOP switch.
2.
Turn "OFF" manual fuel supply to dryer.
4.
Turn “OFF” ALL OTHER SWITCHES .
3.
Turn "OFF" main disconnect to dryer.
54