11. Saving and loading data and settings
Operation and Installation Manual for SOL10.0-1TR3-E4 and SOL11.0-1TR3-E4
66
11.3 Enabling/disabling the USB interface
The USB interface is disabled by default. To use the USB interface
for saving and loading, it must be enabled.
nOTE
The USB interface must be disabled again after
use!
➔
USB features
Options
Install settings
-------------------
Production info
SOLIVIA ##
1. In the main menu, press the
buttons to select
USB features
and then press the button.
→ A note on IP65 protection is then displayed.
protection.
will lose the IP65
Without cover, you
2. Press the button to confi rm.
→ The
300 USB features
menu is then displayed.
➔
Save settings
Create reports
Load settings
Service
-------------------
300 USB features
3. Press the
buttons to select
Service
and then press
the button.
→ The menu
310 Service
is displayed.
➔
Monitoring: Off
State: disabled
-------------------
310 Service
Press the
buttons, to select
Status
and then press
the button.
→ The status indicator fl ashes.
➔
Monitoring: Off
State: enabled
-------------------
310 Service
4. Press the
buttons to select the desired item and
then press the button.
→ The USB interface is now enabled/disabled.
