Delta SOL10.0-1TR3-E4 Operation And Installation Manual Download Page 14

Page: 14 / 90

5. Product Description

Operation and Installation Manual for SOL10.0-1TR3-E4 and SOL11.0-1TR3-E4

5.4.10 Setting Values

You can set various parameters on the display. Use the

but-

tons to change the parameter values.
The button increases the value of the parameter.
The button decreases the value of the parameter.
The

ESC

button can be used to cancel the setting, and the original

value is then displayed.
The button applies the new parameter value.
The example on the next page illustrates the procedure for chang-

ing the value of a parameter.

Example: Setting the date

Buttons

Action

Result

ESC

1. Press the

ESC

button until the main menu is displayed.

2. In the main menu, select

Install Settings

using the

buttons.

➔

Options

Install settings

-------------------

SOLIVIA ##

3. Press the button to open

100 Install Settings

➔

Date and time

Language: English

-------------------

100 Install settings

4. Select

Date and Time

using the

buttons.

➔

Display settings

Date and time

Language: English

-------------------

100 Install settings

5. Press the button to open

110 Date and Time

➔

Time: 14:26:51

Date: 25.05.2012

-------------------

110 Date and time

6. Select

Date

using the

buttons.

➔

Time: 14:26:51

Date: 25.05.2012

-------------------

110 Date and time

7. Press the

BUTTOn TO BEGIn COnFIGURATIOn.

→ The digits for the fi rst value (in this case the day) fl ash.

➔

Time: 14:26:51

Date: 25.05.2012

-------------------

110 Date and time

-------------------

110 Date and time

Time: 14:26:51

➔

Date: 25.05.2012

Date: 25.05.2012
Time: 14:26:51

Time: 14:26:51

8. Select the day using the

buttons.

➔

Time: 14:26:51

Date: 12.05.2012

-------------------

110 Date and time

-------------------

110 Date and time

Time: 14:26:51

➔

Date: 12.05.2012

Date: 12.05.2012
Time: 14:26:51

Time: 14:26:51

9. Press the button to apply the new value.

→ The digits for the second value (in this case the month) fl ash.

➔

Time: 14:26:51

Date: 12.05.2012

-------------------

110 Date and time

-------------------

110 Date and time

Time: 14:26:51

➔

Date: 12.05.2012

Date: 12.05.2012
Time: 14:26:51

Time: 14:26:51

10. Select the month using the

buttons.

➔

Time: 14:26:51

Date: 12.01.2012

-------------------

110 Date and time

-------------------

110 Date and time

Time: 14:26:51

➔

Date: 12.01.2012

Date: 12.01.2012
Time: 14:26:51

Time: 14:26:51

11. Press the button to apply the new value.

→ The digits for the last value (in this case the year) fl ash.

➔

Time: 14:26:51

Date: 12.01.2012

-------------------

110 Date and time

-------------------

110 Date and time

Time: 14:26:51

➔

Date: 12.01.2012

Date: 12.01.2012
Time: 14:26:51

Time: 14:26:51

Summary of Contents for SOL10.0-1TR3-E4



























































































Search results

Summary of Contents for SOL10.0-1TR3-E4

Reviews:

Related manuals for SOL10.0-1TR3-E4

Brands by name

Popular brands

Delta SOL10.0-1TR3-E4, Operation And Installation Manual

Search results

Summary of Contents for SOL10.0-1TR3-E4

Reviews:

Related manuals for SOL10.0-1TR3-E4

Brands by name

Popular brands