Delta DX-2100 Series, User Manual

Page: 64 / 154

D X - 2 1 0 0 S e r i e s I n d u s t r i a l 3 G C l o u d R o u t e r
3 - 2 8
_3
Description Default
The current time of device
Here shows the current time of your device. N/A
Set Local PC Time
Configure time and date settings of the router to be synchronized with the
connected PC.
N/A
Time Zone Setting
Select the operating time zone of your device: GMT-12:00 - GMT+13:00. N/A
Instruction
Example: Sync time between routers and the connected PC.
1. Enter DX webpage.
2. Go to “SYSTEM -> Time Zone Settings”
3. Click “Set Local PC Time”
4. After a confirmation message prompted, click yes and reboot the device to
complete synchronization.
Figure
3.4.3 RS232
RS-232 supports 7 working modes: Transparent mode, Slave mode, Master mode, Serial Server-TCP Server, Serial
Server-TCP Client, Serial Server-UDP Client and MC master mode. This section provides information of specific RS232
port parameters under different working modes. The basic parameters are presented in the table below.
Description Default
Working Mode
Select the working mode for the current active serial port. Close
Baud Rate
Set the baud rate for the serial port. Options are 2400, 4800, 9600, 19200,
38400, 57600 and 115200.
9600
Data Bits
Set port data bits as 7 or 8. When operating in Modbus RTU mode, the value
can only be set as 8.
8
Stop Bits
Set the stop bits for the serial port. Options are 1 and 2. 1
Parity Bits
Set the parity bits for the serial port. Options are None, Odd and Even. None