C h a p t e r 3 I n t r o d u c t i o n t o F u n c t i o n s
3 - 5 1
3_
Description
Defualt
Export Configure List
Export all the mapping and save as a file in the local PC.
N/A
Import Configure List
Import mappings from the local PC. Click “
浏览
” to select the target file first.
N/A
Read/ Write
Set the access permissions for the mapped register address:
Read-only:
Regularly read data from the appointed slave devices and update to the
corresponding register.
Write-only:
Automatically updates the data to the slave once the registers values changed.
Read/write:
Regularly read data from the appointed slave devices and update to the
corresponding register as well as updating data to the slave once the registers values
changed.
Read/ Write
Data Type
Set the type for collected data:
BIT:
Bit type
WORD:
Word type
WORD(SWAP) :
Double words type.
WORD
Address Type
If controller’s model type is “S7-200 ISO TCP”, address type can be set as V/M/Q/I; combined
with data types:
-Bit type
：
VB/MB/QB/IB
-Word type
：
VW/MW/QW/IW
-DWord type
：
VD/MD/QD/ID
If controller’s model type is “S7-300” or “S7-1200/1500 ISO TCP”, address type can be set as
DB/M/Q/I; combined with data types:
-Bit type: DBn_DBX/MB/QB/IB
-Word type: DBn_DBW/MW/QW/IW
-DWord type: DBn_DBD/MD/QD/ID
DB
DB Number
Set the DB number for the starting address of Siemens slave’s register operated in read/ write
tasks. Not configurable when controller’s model type is “S7-200 ISO TCP”.
N/A
Slave Offset Address
Set the starting address of Siemens slave’s register operated in read/ write tasks. If the address is
VD100, the input value would be 100.
N/A
Bit
The address input format is 0.0~X.7. Enter the values before decimal point in the input field of Slave
Offset Address, while values after decimal point should be entered in the input field of Bit.
N/A
Device Starting Address
Set the starting address of the corresponding register. Word-type input range is from $2048 to
$4095. Bit type range is M0~M511. The beginning of a Device Starting Address must starts with a
“$” or “M”.
N/A
Length
Set the number of the continuous address followed by the starting address which will be read or
write. Input range is from 1 to 123.
N/A
Operation
Click on +/- buttons to add or delete mappings.
N/A
Summary of Contents for DX-2100 Series
